Stage Lighting Services

A wired stage intercom unit for use from back stage to sound & lighting control room etc..
The electronics for each station are mounted in a light weight and robust ABS plastic case.
A number of units can be linked together using standard twin screened
microphone cable with 3 pin XLR connectors.

The top face has the headset volume control, mic on/off switch which prevents
unnecessary noises being relayed over the system and the press switch for calling indicator.
Extra bright Yellow LED indicator, very long life - will not break if unit is dropped.

On the rear face are two three way XLR connectors for the
interconnection cables and a four way XLR for the headset connection.

These talkback units are interconnectable with industry standard units.
The system is mains powered by an available power unit box.

A headset / microphone to the users preference is available.

Please note; production of these units has ceased due to some components not now being available, only 4 units remain in stock; in black cases.

Size - 140 x 85 x 50 mm plus XLR connectors to rear. Weight - 230g.
Headphone output - suits 8 ohm to 4k ohm.
Microphone - suits 200 ohm to 600 ohm dynamic microphones.
4 pin XLR for headset / microphone connection.
Side tone rejection and audio bandwidth set to provide
the user with good intelligibility and long term aural comfort.

A separate main power supply, available separately is required.